Stepney Road, Newcastle Upon Tyne, Newcastle upon Tyne, NE2 1TZ

Unit 4A, the smaller of the two units, is of portal frame design with block and brickwork to dado level and insulated profile cladding to eaves. The roof is pitched with an insulated sheet covering incorporating rooflights and has a floor to eaves height of 4.77 m. The unit benefits from reception, office space and WC facilities to the front fitted out to a high specification. Above the offices to the first floor is a canteen and welfare area. The unit is accessed by way of two electrically operated roller shutter doors, one to the rear of the unit providing dock level access (width 3.45 m x height 4.22m) and one to the side elevation provide ground level access (width 3.89 m x height 4.85m). Unit 4B, currently used as a wood cutting workshop, provides open plan manufacturing / storage space. The workshop is of brick built construction with trusses supporting a roof of insulated profile steel sheeting. The walls to the unit are overclad with profile steel cladding from dado to eaves height. The unit has a floor to eaves height of 4 m and is accessed by way of two manual roller shutter doors, one to the central yard (width 3.28 x height 3.23 m) and one to the side of the premises (width 3.13 m x height 2.87 m). In addition the unit benefits from WC facilities within the workshop and a small office area of traditional plaster and paintwork finish with a small storage area above. The premises benefit from a shared yard as well as parking to the front of the premises immediately off Stepney Road.