Unit D3 Kestrel Way, Sowton Industrial Estate, Exeter, EX2 7LA

Summary

The properties are located towards the south end of Sowton Industrial Estate and is accessed from Kestrel Way and then a private access road.

Units D2 / D3 Two adjacent semi-detached warehouse units. There is a large shared concrete yard to the front, which also provides access to Unit D1 and D4 (the latter not in the same ownership). For Unit D1, the front yard / car park is with marked bays for 13 cars plus there are an additional car parking / yard area which accessed from a gap between Unit D1 and Unit D2/D3. This is protected by a steel palisade fence; the gates may be closed to separate the rear yards of D2/D3 and D4 from D1.

The building is of steel portal frame construction and has full height brick and block elevations. The minimum eaves heights are 6.60m. Unit D2 is 4m longer than D3 to the rear. The roof is pitched, with profile steel sheet coverings incorporating roof lights, and drains via external plastic rainwater goods. Internally, a full height block wall separates D2 from D3 and accessways at either end of the building allow movement between the two. The units have concrete floors and Powrmatic overhead gas fired heaters.

Unit D2 there are office rooms with an adjacent kitchen, above which a mezzanine floor extends along the full length of Unit D2. The offices have carpeted floor, plastered and painted walls and ceilings, flush-mounted fluorescent strip lights with diffusers, and wall-mounted radiators. The kitchen is fitted with modern units and has an Altro-style floor surface. The mezzanine, accessed via stairs has a steel frame and a boarded floor, and is used as workshop and additional storage space.

Both units have separate male and female WC facilities.

Key Points

Location