Bays 1 & 2, Millfields Road, Ettingshall, Wolverhampton, WV4 6JE

The premises comprise two bays constructed predominantly of part brick part profile clad elevations beneath from a pitch steel trussed roof incorporating transparent roof lighting. The Bays are lit by sodium lighting and benefit from a minimum eaves height ranging from 25’9” to 29’0”. The building benefits from two 5 tonne cranes, a 7.5 tonne crane and a 10 tonne crane (not tested). A works office/store is also situated in between Bays 1 and 2. Access is via two large electrically operated roller shutter doors (20’0”x16’1”). The bays benefit from gas fired radiant heaters (not tested).
In addition, there is a two storey brick built office block located within Bay 2. Internally, the building comprises offices, kitchen facilities, canteen and ladies and gents WC’s and benefits from a gas fired central heating system (not tested).

Location

The premises are situated fronting Millfields Road between Ettingshall and Bilston. The surrounding road network provides good access to the Black Country Route, approximately ½ mile distant, with dual carriage way access to Junction 10 of the M6 Motorway approximately 4 miles distant and the Birmingham New Road which provides dual carriageway access to Junction 2 of the M5 Motorway approximately 7 miles distant. Bilston Town Centre is approximately 1 mile distant with Wolverhampton City Centre approximately 2 miles.

Accommodation

Gross internal areas approximately:-

Bays 1 and 2: 23,736 sq ft (2,205 sq m)
Two Storey Internal Offices: 2,768 sq ft (257 sq m)
Works Office/Store: 208 sq ft (19 sq m)
Total: 26,712 sq ft (2,481 sq m)

Terms

The unit is available by way of a new full repairing and insuring lease on a term to be agreed.

Specification

• A463 Black Country Route approximately ½ mile.
• Minimum eaves height approximately 25’9” (7.85 m).
• Cranes installed (5 tonne—10 tonne).
• www.bulleys.co.uk/1&2millfields